Two service lines, one crew
Concrete Lifting & Polyurea Coating Systems
Florida concrete fails in two distinct ways — it sinks, and it wears out. We fix both: no-demolition polyurethane lifting for sunken and settling slabs, and seamless polyurea coating systems for floors, decks and surfaces that need to survive Florida's heat, humidity and storms.
9
Service lines statewide
Same Day
Typical lift or coat
Free
On-site inspection
Statewide
One crew, every county
Services
Concrete lifting & leveling
Polyurethane Concrete Lifting & Slab Leveling
Same-day, no-demolition slab lifting for sunken driveways, garage floors and patios settling on Florida's soft soil.
Explore this service →
Sinkhole & Settlement Concrete Repair
Honest diagnosis and structural-fill-plus-injection repair for Florida's karst geology and Sinkhole Alley settlement.
Explore this service →
Driveway & Sidewalk Concrete Leveling
Panel-by-panel polyurethane leveling that fixes trip hazards on driveways, sidewalks and walkways in under a day.
Explore this service →Services
Protective coating systems
Polyurea Garage Floor Coatings
One-day polyaspartic flake systems built for Florida humidity, hot-tire pickup and moisture-vapor drive.
Explore this service →
Pool Deck & Patio Coatings
UV-stable, slip-resistant polyaspartic finishes that survive full Florida sun, afternoon storms and pool chemistry.
Explore this service →
Marine, Dock & Seawall Coatings
Seamless polyurea membranes for seawalls, boat lifts and dock decking that shrug off saltwater and tidal cycling.
Explore this service →
Warehouse & Industrial Floor Coatings
Seamless high-build systems for distribution centers, plants and commercial kitchens across Florida.
Explore this service →
Secondary Containment & Tank Coatings
Monolithic chemical-resistant linings for berms, sumps, trenches and tank exteriors built for Florida's rainy season.
Explore this service →
Truck Bed & Trailer Liners
Spray-in polyurea liners with real abrasion and salt-air resistance for beds, trailers and boat-trailer bunks.
Explore this service →Not sure which one you need?
How to tell a lifting problem from a coating problem
Signs you need concrete lifting
If a slab has physically dropped, tilted, or pulled away from a neighboring surface, that's a lifting problem, not a coating problem. Look for a driveway panel that's visibly lower than the one next to it, a garage floor that slopes toward one corner more than it used to, a pool deck section that rocks or puddles after rain, or a gap opening up between a slab and the house foundation. In Florida's west-central Sinkhole Alley counties — Pasco, Hernando, Hillsborough, Polk, Marion and Alachua — this can also mean an active void under the slab, not just ordinary soil settlement, which is why we inspect before we quote rather than assuming either one.
No amount of coating fixes a slab that has actually moved. Coating over a settling surface just means the crack telegraphs through the new finish within a season. Lifting comes first; coating, if wanted, comes after the concrete is stable.
Signs you need a protective coating
If the concrete is structurally sound and level but the surface itself is worn, dusting, staining, peeling, or simply outdated, that's a coating problem. A garage floor that's never been sealed and shows hot-tire marks, a pool deck that's gone slick with algae, a warehouse floor that's pitting under forklift traffic, or a dock and seawall taking on salt spray all fall here. Florida's humidity and UV index are harder on an unprotected or DIY-coated surface than almost anywhere else in the country, which is the throughline across every coating page on this site.
Plenty of jobs are genuinely both — a driveway that's sunken and also has a failing sealer, for instance. That's normal, and it's exactly why both service lines run out of the same crew: we scope the lift and the finish together on one visit instead of sending you to two different contractors.
Get a free inspection & quote
Tell us what's sinking, cracking or wearing out. We'll come back with a scoped, itemized number — no obligation.
Read before you decide
Two comparison guides worth reading first
Polyurea vs Epoxy
An honest comparison for Florida's humidity, UV and cure-time realities — cure time, moisture tolerance, chalking, cost per square foot, and where epoxy genuinely still wins.
Lifting vs Slab Replacement
When polyurethane lifting is the right call, when a slab genuinely needs to come out, and the real cost and timeline difference between the two on Florida soil.